Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Shelf rack kit for 1841

I cannot seem to find a part number for a rack kit for the 1841 router, I would like to get the Gen kit that is a shelf kit. Can you get me the part number?

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Silver

Re: Shelf rack kit for 1841

Mark

I found this set of Q&A about rack mount for the 1841:

Q. Is the Cisco 1841 rack-mountable?

A. The Cisco 1841 is now rack-mountable. In order to enable the rack-mount functionality, the optional Cisco 1841 rack-mount kit (ACS-1841-19-RM=) needs to be used.

Q. When was the rack-mount capability introduced on the Cisco 1841?

A. All Cisco 1841 chassis shipping since Q4FY06 are rack-mountable. Cisco 1841 chassis with the following starting serial numbers have the rack-mount screw holes: FTX1009W0Z3 (United States), FCZ100812UR (Europe, Middle East, and Africa), and FHK100653JL (Asia Pacific).

Q. Are all Cisco 1841 chassis rack-mountable?

A. All Cisco 1841 chassis shipping since Q4FY06 are rack-mountable. Please refer to the serial numbers provided above to find out whether a specific chassis has the rack-mount screw holes to be rack-mountable with the optional rack-mount kit. All chassis currently shipping are rack-mountable with the optional Cisco 1841 rack-mount kit.

it was at this URL:

http://www.cisco.com/en/US/products/ps5853/products_qanda_item0900aecd80181208.shtml

HTH

Rick

2 REPLIES
Hall of Fame Super Gold

Re: Shelf rack kit for 1841

Hi,

should be ACS-1800-RM-19=

Hope this helps, please rate all useful posts!

Hall of Fame Super Silver

Re: Shelf rack kit for 1841

Mark

I found this set of Q&A about rack mount for the 1841:

Q. Is the Cisco 1841 rack-mountable?

A. The Cisco 1841 is now rack-mountable. In order to enable the rack-mount functionality, the optional Cisco 1841 rack-mount kit (ACS-1841-19-RM=) needs to be used.

Q. When was the rack-mount capability introduced on the Cisco 1841?

A. All Cisco 1841 chassis shipping since Q4FY06 are rack-mountable. Cisco 1841 chassis with the following starting serial numbers have the rack-mount screw holes: FTX1009W0Z3 (United States), FCZ100812UR (Europe, Middle East, and Africa), and FHK100653JL (Asia Pacific).

Q. Are all Cisco 1841 chassis rack-mountable?

A. All Cisco 1841 chassis shipping since Q4FY06 are rack-mountable. Please refer to the serial numbers provided above to find out whether a specific chassis has the rack-mount screw holes to be rack-mountable with the optional rack-mount kit. All chassis currently shipping are rack-mountable with the optional Cisco 1841 rack-mount kit.

it was at this URL:

http://www.cisco.com/en/US/products/ps5853/products_qanda_item0900aecd80181208.shtml

HTH

Rick

347
Views
5
Helpful
2
Replies