Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

show commands for AAA in Cisco IOS?

I have been looking all over for a reference to how to show if aaa new-model or aaa authentication, authorization and accounting details are configured on the router. I dont want to do a "show running-config"

I thought there was a show aaa command? and I am looking for a show running-config filter?

show running-config | include aaa? was looking for a list of running-config | filters.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: show commands for AAA in Cisco IOS?

Always check http://www.cisco.com/univercd

show aaa attributes

show aaa cache filterserver

show aaa dead-criteria

show aaa local user locked

show aaa server-private

show aaa servers

show aaa user

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hsec_r/sec_s1h.htm#wp1207068

Hope this help,

if it does, please rate this post.

Vlad

for the filters dont forget that sometimes you'll have radius our tacacs servers,

so :

show running | i aaa |radius

show runn | i aaa |tacacs

2 REPLIES

Re: show commands for AAA in Cisco IOS?

Always check http://www.cisco.com/univercd

show aaa attributes

show aaa cache filterserver

show aaa dead-criteria

show aaa local user locked

show aaa server-private

show aaa servers

show aaa user

http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hsec_r/sec_s1h.htm#wp1207068

Hope this help,

if it does, please rate this post.

Vlad

for the filters dont forget that sometimes you'll have radius our tacacs servers,

so :

show running | i aaa |radius

show runn | i aaa |tacacs

New Member

Re: show commands for AAA in Cisco IOS?

thanks, I have seen all those commands before,

was looking for this output from a show command:

aaa new-model

aaa authentication login default group tacacs+ local-case

aaa authentication enable default group tacacs+ enable

aaa authorization commands 15 default group tacacs+ local

aaa accounting exec default stop-only group tacacs+

aaa accounting commands 15 default stop-only group tacacs+

aaa accounting network default stop-only group tacacs+

thats from a show run

wanted like show aaa accounting etc....

904
Views
0
Helpful
2
Replies
CreatePlease login to create content