Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

show ip interface brief command output

Hi,

I have seen 'show ip interface brief' command output.

For some interfaces 'method' it is showing 'NVRAM' and for some interfaces it is 'Manual'.

What does it mean?

Regards

SKR

6 REPLIES
Cisco Employee

Re: show ip interface brief command output

NVRAM means that the interface was configured via the startup configuration at boot time. Manual means the interface was configured manually after boot time.

New Member

Re: show ip interface brief command output

Hi jclarke,

Thanks for your response. So, if I reload the router it shows 'Method' NVRAM right?

Regards

SKR

Cisco Employee

Re: show ip interface brief command output

Yes, provided you don't do any configuration after that (and you've saved some interface config to the startup config).

New Member

Re: show ip interface brief command output

Thanks jclarke.

Regards

SKR

New Member

hello, what about CONFIG

hello,

 

what about CONFIG method. what is the difference between that and manual and how can I change it to CONFIG? this is related to the ASA 5585.

 

thanks!!

Cisco Employee

Please start a new thread for

Please start a new thread for your question.  You'll likely want to ask in one of the security spaces to get the ASA experts.

4763
Views
9
Helpful
6
Replies