Simple Memory Verification from "show version"

[kharris]

Could someone simply verify if this is a 64/32 memory setup (64MB DRAM / 32MB Flash). IF not, then what...

"show version" output on 1760 Modular Router:

---------------------------------------

Cisco Internetwork Operating System Software

IOS (tm) C1700 Software (C1700-Y-M), Version 12.2(15)T7, RELEASE SOFTWARE (fc2)

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Sat 09-Aug-03 06:39 by ccai

Image text-base: 0x80008120, data-base: 0x80991E5C

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

"Router" uptime is 3 hours, 4 minutes

System returned to ROM by power-on

System restarted at 22:07:15 dst Mon May 22 2006

System image file is "flash:c1700-y-mz.122-15.T7.bin"

cisco 1760 (MPC860P) processor (revision 0x500) with 54110K/11426K bytes of memory.

Processor board ID FOC07371G7T (3805393428), with hardware revision 0000

MPC860P processor: part number 5, mask 2

Bridging software.

X.25 software, Version 3.0.0.

2 Ethernet/IEEE 802.3 interface(s)

1 FastEthernet/IEEE 802.3 interface(s)

32K bytes of non-volatile configuration memory.

32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

----------------------------------------

Thanks.

[Harold Ritter · Accepted solution]

Yes, it is.

cisco 1760 (MPC860P) processor (revision 0x500) with 54110K/11426K bytes of memory (64Meg DRAM)

32768K bytes of processor board System flash (Read/Write) (32Meg Flash)

Hope this helps,

[kharris]

Just wanted to make sure. Haven't had to deal with changing IOS images...wanted to verify my hardware.

Thanks.