I've configured a network with PE's and CE's what I have is EIGRP running between PE's and EBGP between PE and CE's. can't reach router loopback address of other CE's. Routing on the PE's works to all locations without a problem. I have DMVPN running between PE's but this is'nt impacting the routing in anyway because the PE's can reach other and all LAN and loopback subnets.
Between CE and PE i redistribute EIGRP into BGP and BGP into EIGRP.
The problem seems to be the routing between CE-CE.
from CE-1 pinging loopback 192.168.3.1
from CE-1 pinging loopback 192.168.10.1
All other routing works well.
Can anyone point me in the right direction configurations attached,
All i need is to have full routing from the CE's. I don't know why the PE's are dropping packets destined for other CE's.
We are pleased to announce availability of Beta software for 16.6.3.
16.6.3 will be the second rebuild on the 16.6 release train targeted
towards Catalyst 9500/9400/9300/3850/3650 switching platforms. We are
looking for early feedback from customers befor...
Introduction Featured Speakers Luis Espejel is the Telecommunications
Manager of IENova, an Oil & Gas company. Currently he works with Cisco
IOS® and Cisco IOS XE platforms, and NX to some extent. He has also
worked as a Senior Engineer with the Routing P...
In this session you can learn more about Layer 3 multicast and the best
practices to identify possible threats and take security measures. It
provides an overview of basic multicast, the best security practices for
use of this technology, and recommendati...