There are basically 2 ways to assign IP address to devices within a vlan
Note - usually there is a one-to-one relationship between a vlan and an IP subnet.
1) Assign them manually on each end device which is time consuming but for things like servers is generally what you do.
2) Assign them dynamically as Saju has covered in his post. You set up an IP subnet within a DHCP server and the DHCP server hands out IP addresses within the subnet to devices. Generally DHCP is used for client workstations/laptops.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.