Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

simulator

have just started training for CCNA exam pls can u get me the simulator for pratice

7 REPLIES
Cisco Employee

Re: simulator

Please check the following link:

http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: simulator

HI hritter!

When u setup this Software how y could run it?i have used "-P 3600" To emulate a Cisco 3600,but doesn't work

10xs

Cisco Employee

Re: simulator

Don't forget that this software emulates the 3600 or 7200 HW. You still need to have the Cisco IOS for one of these platforms in order to get going.

Please read the following document for more information:

http://www.ipflow.utc.fr/dynamips/README-0.2.5.txt

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: simulator

HI

PLZ SEND FOR ME AN IOS NAME FOR THE 7200 SERIES

10XS

REGARDS

Cisco Employee

Re: simulator

Ali,

You can take any 7200 IOS image. Assuming you have a CCO account, you can download these images from CCO, if you don't already have one.

Hope this helps,

Harold Ritter
Sr. Technical Leader
CCIE 4168 (R&S, SP)
harold@cisco.com
México móvil: +52 1 55 8312 4915
Cisco México
Paseo de la Reforma 222
Piso 19
Cuauhtémoc, Juárez
Ciudad de México, 06600
México
New Member

Re: simulator

Hi!

i brought this IOS c3660-is-mz.122-17a.bin;AND I Issued in the command line "-P 3600".but doesn't work!how can i run it?

10xs

Re: simulator

Ali,

Download and install dynagen.

Make sure the IOS file is in the correct directory (mostly it is Program Files\Dynamips\images)

then create a .net file and run

sample net file is below

autostart = False

model = 3660

[localhost]

ram = 160

[[ROUTER R1]]

image = \Program Files\Dynamips\images\c3660-is-mz.122-17a.bin

idlepc = 0x60d705c4

model = 3660

S2/0 = R2 s2/0

console = 2001

[[ROUTER R2]]

image = \Program Files\Dynamips\images\c3660-is-mz.122-17a.bin

idlepc = 0x60d705c4

model = 3660

console = 2002

HTH, rate if it does

Narayan

119
Views
0
Helpful
7
Replies
CreatePlease to create content