What Tc interval can I expect from CB Shaping on a SIP400?
According to SIP/SPA config guide, setting Bc or Be is not supported on the SIP400 for class-based shaping.
I need a small Tc interval for low jitter.
HW: SIP400, SPA-2X1GE-V2
SW: 12.2(33)SRB
CONFIG:
interface GigabitEthernet3/0/1.113
encapsulation dot1Q 113
ip vrf forwarding XY
ip address x.x.x.x x.x.x.x
service-policy output PARENT
policy-map PARENT
class class-default
shape average 2000000
service-policy CHILD
policy-map CHILD
class VOICE
priority percent 25
class class-default
