Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SLA values extraction using EEM tcl

I am trying to extract the numerical value from the followng using Embedded event manager(TCL Scripting)

i also have SLA probes running between 2 connected routers

 

sho ip sla statistics | sec SD Jitter

 

So i write the the following

 

conf ter

event manager applet STAT

event none  sync yes

action 1 cli command "enable"

action 2  cli command "sho ip sla stat | sec SD Jitter"

action 3 regexp  " [0-9]+ " $_cli_result result

action 4 puts "$result"

 

However it produces result

*Mar 27 16:42:08.806: %HA_EM-3-FMPD_UNKNOWN_ENV: fh_parse_var: could not find environment variable: result

*Mar 27 16:42:08.806: %HA_EM-3-FMPD_ERROR: Error executing applet STAT statement 4

 

pls clarify

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Could you try with this

Could you try with this combination:

action 2  cli command "sho ip sla stat | sec SD Jitter"

action 3 regexp  "[0-9]+" "$_cli_result" result

action 4 puts $result

 

HTH,

Dragan

HTH, Dragan
1 REPLY
Silver

Could you try with this

Could you try with this combination:

action 2  cli command "sho ip sla stat | sec SD Jitter"

action 3 regexp  "[0-9]+" "$_cli_result" result

action 4 puts $result

 

HTH,

Dragan

HTH, Dragan
45
Views
0
Helpful
1
Replies
CreatePlease to create content