Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

slot/module/port

what does slot/module/port concept means, especially in Switch 3750?

2 REPLIES
Cisco Employee

Re: slot/module/port

Hi Sawsan,

On 3750 switch a concept of

stack number/module number/port number is used

stack number refers the switch in stack if you have 3750 configured in stacking if no stacking configured it is always 1.

module number always 0 on the Catalyst 3750 switch

port number is the physical interface on that particular stack if no ctacking configured then it is always referd as 1.

For instance

interface gigabitethernet1/0/4 on 3750 means inetrface 4 on module 0 on stack switch 1.

interface fastethernet3/0/4

it means fast ethernet port number 4 on module 0 on stack member switch 3.

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12225see/scg/swint.htm#wp1055267

HTH

Ankur

New Member

Re: slot/module/port

hi ankur,

first thanks for your answer, it helped me a lot. but what i'm confused about is the module number. what is the purpose of the module number in 3750 if it is not a modular switch, and the module number always set to 0?

2012
Views
3
Helpful
2
Replies
CreatePlease to create content