Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Slow PERFORMANCE with PAT and Port Forwarding (Router 2921)

Hello everyone! 

Here is simple topology.

I have very slow internet connection thru the router. And FTP server unbelievable slow for access from internet.

 

3 REPLIES

Hi,Please correct me if I'm

Hi,

Please correct me if I'm wrong, should not you defined only the ftp server ip address in the access list tied to the ip nat service?, please try to do a simple configuration and see if it works, example:

access-list 1 permit host 192.168.1.135
ip nat service list 1 ftp tcp port 1600

Regards,

Aref

New Member

Hi, Aref. Thanks for

Hi, Aref. Thanks for attention, I don't think it reasonable.

I was playing around with Dialer 0 interface and by removing that strings:

no ppp pfc local request
no ppp pfc remote apply

( cause I have no idea what does it mean )  I got it working properly.

Glad to know that. I don't

Glad to know that. I don't have any experience with those commands, but please check out this link where they are explained:

http://www.cisco.com/c/en/us/td/docs/ios/12_2/12_2b/12_2b8/feature/guide/12b_acf.html

Regards,

Aref

369
Views
0
Helpful
3
Replies
CreatePlease to create content