11-06-2005 07:17 PM - edited 03-03-2019 10:54 AM
Why are my pings to loacl ATM interfcae +100ms
interface ATM3/0
description
no ip address
no ip route-cache
no ip mroute-cache
atm ilmi-keepalive
!
interface ATM3/0.601 point-to-point
description point to point PVC
bandwidth 128
ip address 10.92.252.58 255.255.255.252
no ip route-cache
no ip mroute-cache
pvc 0/601
vbr-nrt 143 143 32
encapsulation aal5snap
11-11-2005 06:48 AM
try doing a shut and no shut on the ATM interface.
11-15-2005 02:42 AM
a ping to your interface will go through your network and than back to your interface.
You can check this by pinging the other side and than your own interface
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide