Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Slow pings to loacl ATM interface

Why are my pings to loacl ATM interfcae +100ms

interface ATM3/0

description

no ip address

no ip route-cache

no ip mroute-cache

atm ilmi-keepalive

!

interface ATM3/0.601 point-to-point

description point to point PVC

bandwidth 128

ip address 10.92.252.58 255.255.255.252

no ip route-cache

no ip mroute-cache

pvc 0/601

vbr-nrt 143 143 32

encapsulation aal5snap

2 REPLIES
Silver

Re: Slow pings to loacl ATM interface

try doing a shut and no shut on the ATM interface.

New Member

Re: Slow pings to loacl ATM interface

a ping to your interface will go through your network and than back to your interface.

You can check this by pinging the other side and than your own interface

85
Views
0
Helpful
2
Replies
CreatePlease login to create content