We have multiple locations connected through dmvpn,some sites have 192.x.x.x in lan segment and remaining sites have 10.x.x.x in lan segments.Though the isp bandwidth is good ,file transferring between servers in 192.x.x.x and 10.x.x.x is slow. transfer between 10.x.x.x segments is good.Files are located in the location's local server.
The setup in the location having 192.x.x.x segment is like this modem->router (having loopback in 10.x.x.x segment)->switch having 192.x.x.x segment(layer 2)
while in other sites having 10.x.x.x segment ,the L3 stuff is taken care by the switches behind the router.
Modem->router (having loopback in 10.x.x.x segment)->switch(L3)
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...