Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP - CISCO-CONFIG-COPY- 2900

Hi guys,

Ive read about every example and issue regarding sending the copy commands yet still cannot seem to get the commands to work

the switch was runnnig 12.2 so i upgraded it to 15 and yet the issue stays.

Here is what the switch shows when I send it the commands.

Mar 30 05:14:26.595: SNMP: Packet received via UDP from 172.16.0.10 on Vlan1

Mar 30 05:14:26.595: SNMP: Set request, reqid 690368659, errstat 0, erridx 0

ccCopyEntry.2 = 1

ccCopyEntry.3 = 4

ccCopyEntry.4 = 1

ccCopyEntry.5 = 172.16.0.10

ccCopyEntry.6 = testconf

ccCopyEntry.14 = 4

Mar 30 05:14:26.620:

Incoming SNMP packet

Mar 30 05:14:26.620: v2c packet

Mar 30 05:14:26.620: community string: RandDWrite

Mar 30 05:14:26.620: SNMP: Response, reqid 690368659, errstat 11, erridx 1

ccCopyEntry.2 = 1

ccCopyEntry.3 = 4

ccCopyEntry.4 = 1

ccCopyEntry.5 = 172.16.0.10

ccCopyEntry.6 = testconf

ccCopyEntry.14 = 4

Mar 30 05:14:26.653: SNMP: Packet sent via UDP to 172.16.0.10

1 REPLY

Re: SNMP - CISCO-CONFIG-COPY- 2900

Hi Dan,

ccCopyEntry.14 = 4

try to set ccCopyEntry.14 (ccCopyEntryRowStatus) to 1:

https://supportforums.cisco.com/message/3931995#3931995

And all of this OIDs need an additional random number, e.g. 99:

ccCopyEntry.2.99 = 1

ccCopyEntry.3.99 = 4

ccCopyEntry.4.99 = 1

(...)

ccCopyEntry.14.99 = 1

---------------------------------

ccCopyEntry.14.99 = 6 (destroy)

Hope that helps

Rolf

128
Views
0
Helpful
1
Replies