Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

Snmp Config

Hi ALL:

I am facing a very peculiar issue with SNMP.

Every thing workfine when i put

snmp-server group snmpgroup v3 auth in the running config and save it but once the

switch get reloaded i see this in the running config and my NMS tool do not show that the

router is up.

Any idea why is this happening

snmp-server group snmpgroup v3 auth read notify *tv.FFFFFFFF.FFFFFFFF.FFFFFFFF

snmp-server group snmpgrp v3 auth

groupname: snmpgrp security model:v3 auth

readview :v1default writeview: <no writeview specified>

notifyview: <no notifyview specified>

row status: active

groupname: snmpgroup security model:v3 auth

readview :<no readview specified> writeview: <no writeview specified>

notifyview: *tv.FFFFFFFF.FFFFFFFF.FFF

row status: active

Chao

Vishwa

2 REPLIES
Silver

Re: Snmp Config

Try to reconfigure your SNMP configuration. And try. If still you are getting same problem then only solution is to upgrade it and use some other NMS tool.

New Member

Re: Snmp Config

After doing a lot of research i was able to resolve the issue.

I found that the string is present in the SNMP view internet.

So i excluded the string form the view and after doing that evry thing worked fine.

I dont know what all the command did when i removed it but the issue is resolved.

Before

show snmp view

v1default iso - included volatile active

v1default internet.6.3.15 - excluded volatile active

v1default internet.6.3.16 - excluded volatile active

v1default internet.6.3.18 - excluded volatile active

notifyview internet - included nonvolatile active

*tv.FFFFFFFF.FFFFFFFF.FFFFFFFF internet - included volatile active

snmp-server view notifyview internet excluded.

After

sh snmp view

v1default iso - included volatile active

v1default internet.6.3.15 - excluded volatile active

v1default internet.6.3.16 - excluded volatile active

v1default internet.6.3.18 - excluded volatile active

notifyview internet - excluded nonvolatile active

Chao

Vishwa

239
Views
0
Helpful
2
Replies
CreatePlease to create content