Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP Object navigator- Ios Version

I m getting the error , not supported for the following Show version in Snmp Object Navigator in this link,

http://tools.cisco.com/Support/SNMP/do/MIBSupport.do?local=en&step=3

sh version

Cisco IOS Software, c7600s3223_rp Software (c7600s3223_rp-IPSERVICES-M), Version

12.2(33)SRB1, RELEASE SOFTWARE (fc3)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Fri 01-Jun-07 07:53 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)

GJ-AHM-BDH-AR01 uptime is 31 weeks, 4 days, 23 hours, 42 minutes

Uptime for this control processor is 31 weeks, 4 days, 23 hours, 51 minutes

Time since switched to active is 31 weeks, 4 days, 23 hours, 44

minutes

System returned to ROM by power-on (SP by power-on)

System image file is "bootdisk:c7600s3223-ipservices-mz.122-33.SRB1.bin"

Last reload type: Normal Reload

cisco CISCO7609 (R7000) processor (revision 1.2) with 458752K/65536K bytes of me

mory.

Processor board ID FOX11330J4M

R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache

Last reset from power-on

2 SIP-200 controllers (32 E1)(2 POS).

1 Virtual Ethernet interface

48 FastEthernet interfaces

18 Gigabit Ethernet interfaces

32 Serial interfaces

32 Channelized E1 ports

2 Packet over SONET interfaces

1915K bytes of non-volatile configuration memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

Configuration register is 0x2102

1 REPLY
Cisco Employee

Re: SNMP Object navigator- Ios Version

Try my MIBs In Images tool instead. Send an email to mii@external.cisco.com with "c7600s3223-ipservices-mz.122-33.SRB1.bin" in the body, and you'll get your list. I've updated the MIB Locator feeder tool, but it will take time to propagate the change.

438
Views
3
Helpful
1
Replies