Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP on cisco router

I want to configure SNMP on my cisco 26xx and 36xx series routers, i have solarwinds configure on my one of the desktop now i want to configure the SNMP to make communication between both Solarwinds and cisco routers, then what are the configuration and understanding require in order to make it function properly. I am also looking for some good link for the same.

4 REPLIES

Re: SNMP on cisco router

Always a good place to start (google):

try: cisco snmp univercd

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_c/fcfprt3/fcf014.htm

snmp is quite simple to configure, at least for basic stuff.

it all starts with the snmp command.

HTH,

Vlad

Re: SNMP on cisco router

to get started in Solarwainds you just need the following command

(config)#snmp-server community RO

HTH

Narayan

Re: SNMP on cisco router

Uhh that's pretty dangerous. You might want something like-

(config)#snmp-server community RO 10

(config)#access-list 10 remark Allow SNMP

(config)#access-list 10 permit

New Member

Re: SNMP on cisco router

The better way to congfigure SNMP on router is as follows.

(config)#access-list 50 remark **** SolarWinds Server ***

(config)#access-list 50 permit 10.1.1.1

Suppose "10.1.1.1" is ip of your Solarwind Server.

(config)#snmp-server community NY-RTR2611-01 RO 50

(config)#snmp-server trap-source Loopback0

(config)#snmp-server enable traps

(config)#snmp-server host 10.1.1.1 NY-RTR2611-01

Here "NY-RTR2611-01" is snmp string you can set it as you want. hope it helps.

1244
Views
0
Helpful
4
Replies
CreatePlease login to create content