Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP Virtual-Access interface Traps

Folks, can anyone help me with an issue whereby we are constantly receiving SNMP traps for virtual-access interfaces going up and down, what do we need to add to out config :

2 REPLIES
Bronze

Re: SNMP Virtual-Access interface Traps

Can you add a "sh ver" to the post for me?

Thanks,

Stephen

New Member

Re: SNMP Virtual-Access interface Traps

Hi,

Please see attached :

#sh ver

Cisco Internetwork Operating System Software

IOS (tm) 3600 Software (C3640-I-M), Version 11.3(10)T, RELEASE SOFTWARE (fc1)

Copyright (c) 1986-1999 by cisco Systems, Inc.

Compiled Wed 02-Jun-99 05:46 by pwade

Image text-base: 0x60008918, data-base: 0x605CA000

ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

BOIAS-NIA-3> uptime is 1 year, 40 weeks, 2 days, 2 hours, 11 minutes

System restarted by power-on at 10:26:43 GMT Mon Feb 21 2005

System image file is "flash:c3640-i-mz.113-10.T", booted via flash

cisco 3640 (R4700) processor (revision 0x00) with 36864K/12288K bytes of memory.

Processor board ID 15617739

R4700 processor, Implementation 33, Revision 1.0

Channelized E1, Version 1.0.

Bridging software.

X.25 software, Version 3.0.0.

Primary Rate ISDN software, Version 1.1.

Basic Rate ISDN software, Version 1.1.

1 Ethernet/IEEE 802.3 interface(s)

32 Serial network interface(s)

1 ISDN Basic Rate interface(s)

1 Channelized E1/PRI port(s)

DRAM configuration is 64 bits wide with parity disabled.

125K bytes of non-volatile configuration memory.

16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

295
Views
0
Helpful
2
Replies
CreatePlease login to create content