Hello All,
I have two 2911 ISRs with the UniversalK9 image:
Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(3)T3, RELEASE SOFTWARE (fc1)
I want to setup routing failover by using IP SLA and object tracking. I'm following these guides:
1) https://supportforums.cisco.com/docs/DOC-8313
2) http://www.cisco.com/c/en/us/td/docs/ios/dial/configuration/guide/12_2sr/dia_12_2sr_book/dia_rel_stc_rtg_bckup.html#wp1064193
I can setup an IP SLA using ICMP ECHO. This works.
However, next I need to do "track 10 rtr ..." but the "rtr" part is not supported:
TestSub#config t
Enter configuration commands, one per line. End with CNTL/Z.
TestSub(config)#track 10 ?
application Application
interface Select an interface to track
ip IP protocol
list Group objects in a list
stub-object Stub tracking object
TestSub(config)#track 10
What should I do? Some people told me I need Advanced IP Services lisence, but I already have it (I think):
-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security securityk9 Permanent securityk9
uc None None None
data datak9 Permanent datak9
Thanks,
Chris
