Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

[SOLVED] Routing Failover on 2911 ISR

Hello All,

I have two 2911 ISRs with the UniversalK9 image:

Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.1(3)T3, RELEASE SOFTWARE (fc1)

I want to setup routing failover by using IP SLA and object tracking. I'm following these guides:

1) https://supportforums.cisco.com/docs/DOC-8313

2) http://www.cisco.com/c/en/us/td/docs/ios/dial/configuration/guide/12_2sr/dia_12_2sr_book/dia_rel_stc_rtg_bckup.html#wp1064193

I can setup an IP SLA using ICMP ECHO. This works.

However, next I need to do "track 10 rtr ..." but the "rtr" part is not supported:

TestSub#config t

Enter configuration commands, one per line.  End with CNTL/Z.

TestSub(config)#track 10 ?

  application  Application

  interface    Select an interface to track

  ip           IP protocol

  list         Group objects in a list

  stub-object  Stub tracking object

TestSub(config)#track 10

What should I do? Some people told me I need Advanced IP Services lisence, but I already have it (I think):

-----------------------------------------------------------------

Technology    Technology-package           Technology-package

              Current       Type           Next reboot 

------------------------------------------------------------------

ipbase        ipbasek9      Permanent      ipbasek9

security      securityk9    Permanent      securityk9

uc            None          None           None

data          datak9        Permanent      datak9

Thanks,

Chris

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Purple

Routing Failover on 2911 ISR

Hi,

Try this: track 10 ip sla  x  where x is your sla instance.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
2 REPLIES
Purple

Routing Failover on 2911 ISR

Hi,

Try this: track 10 ip sla  x  where x is your sla instance.

Regards

Alain

Don't forget to rate helpful posts.

Don't forget to rate helpful posts.
New Member

Routing Failover on 2911 ISR

Thanks Alain, you are amazing. Routing failover now working like a charm .

483
Views
0
Helpful
2
Replies
CreatePlease to create content