something about high cpu process _

[xiaodong.pei]

CPU utilization for five seconds: 78%/2%; one minute: 77%; five minutes: 78%

PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process

47 3280182123005882357 109 51.19% 51.08% 51.29% 0 Cat4k Mgmt LoPri

what's the reason for the high cpu process?

[pompeychimes]

Issue a "sh proc cpu" and see what process or processes stand out. If unsure post output here.

[cisco_lad2004]

or "show proc cpu | exc 0.0" to get a better view.

[xiaodong.pei]

here is the show process cpu | exclu 0.0

[cisco_lad2004]

Have you made any recent changes to ur network that might have caused this ?

there are also few bugs related to using 801.1x, but to safe lets be methodical and start troubelshooting from basics. see attached link.

http://www.cisco.com/en/US/products/hw/switches/ps663/products_tech_note09186a00804cef15.shtml

HTH

Sam

[xiaodong.pei]

according to the attached link, i issured the commmand

show platform health | exclude 0.0