Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SPA-1XCHSTM1/OC3, configuring 64kbps channels ? Is it possible ?

Hi all,

Is it possible to configure 64kbps channels on the SPA-1XCHSTM1/OC3 card on an 7613 with the kitlist mentioned below ?

Product

Description

Quantity

7600-SIP-200=

Cisco 7600 Series SPA Interface Processor-200

1

MEM-SIP-200-512M

512MB Memory for 7600 SIP-200

1

SPA-1XCHSTM1/OC3

1-port Channelized STM-1/OC-3c to DS0 Shared Port Adapter

1

SFP-OC3-IR1

OC3/STM1 SFP, Single-mode fiber, Intermediate Reach

1

Included: 7600-SPA

SPA for Cisco 7600; No Physical Part; For Tracking Only

1

Thanks in advance.

Dumlu

1 REPLY
Hall of Fame Super Silver

Re: SPA-1XCHSTM1/OC3, configuring 64kbps channels ? Is it possib

Hello Dumlu,

yes you should be able to configure the channelized OC-3 with a level of detail of DS0 channel-group on an E1/T1.

( ech group made of one or more DS0 timeslots)

Be aware that:

the OC-3 will be carrying three DS3/E3 channelized on the port.

On their turn each channelized DS3/E3 can be configured as a group of T1/E1 ports.

Each E1/T1 can be then configured as a controller with one or more channel-groups.

The ability of using sub E1/T1 depends also on the capabilities of external RED /ADM connecting to the OC-3 port.

see

http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/7600series/76cfstm1.html#wp1161296

However, you can expect that there will be a limit on the max number of channel-groups you can configure on it.

Hope to help

Giuseppe

1126
Views
0
Helpful
1
Replies
CreatePlease to create content