Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Spanning Tree output

Hi, What is the meaning of "Prio.Nbr" of Spanning tree output ? What "128.3 /128.18" says

Switch#sh spanning-tree vlan 130 brief

VLAN0130

Spanning tree enabled protocol ieee

Root ID Priority 8192

Address 000b.bf8c.a402

This bridge is the root

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Bridge ID Priority 8192

Address 000b.bf8c.a402

Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec

Aging Time 300

Interface Role Sts Cost Prio.Nbr Type

---------------- ---- --- --------- -------- --------------------------------

Gi1/3 Desg FWD 4 128.3 P2p

Gi1/18 Desg FWD 4 128.18 P2p

4 REPLIES
Hall of Fame Super Gold

Re: Spanning Tree output

Cost priority is self explaining.

Number is the unique port identifier for all ports on all bridges

--> Bridge id + port number

Community Member

Re: Spanning Tree output

Thanks. One thing more, I am confused with Bridge ID. I know the Root ID. Please help me about Bridge ID.

Community Member

Re: Spanning Tree output

BID is priority 8192 + extended ID (vlan 130) + MAC address.

In your case, you're the root, so the two lines of output are the same.

Community Member

Re: Spanning Tree output

Hi, Why Interface No and Port ID is not matching in spanning-tree output ??

Interface Designated

Name Port ID Prio Cost Sts Cost Bridge ID Port ID

-------------------- ------- ---- ----- --- ----- -------------------- -------

FastEthernet0/9 128.10 128 19 FWD 19 32768 cc01.08e4.0000 128.10

FastEthernet0/10 128.11 128 19 FWD 19 32768 cc01.08e4.0000 128.11

FastEthernet0/13 128.14 128 19 FWD 0 32768 cc00.08e4.0000 128.14

FastEthernet0/14 128.15 128 19 BLK 0 32768 cc00.08e4.0000 128.15

FastEthernet0/15 128.16 128 19 BLK 0 32768 cc00.08e4.0000 128.16

126
Views
0
Helpful
4
Replies
CreatePlease to create content