I first would like to ask where is the supernet of 18.104.22.168/23 coming from? How is it defined or how does the router learn it? Knowing that might affect the answer of what to do about it.
Would I be correct in assuming that there is a typo in your post and where you have:
that you really meant:
(the supernet of 22.214.171.124/23 includes the /24s 126.96.36.199 and 188.8.131.52)
My suggestion would be to configure two static routes
on the router. How to configure them (to point to an interface or to point to a next hop) would depend somewhat on where they come from and how the router has learned about them. Then you can redistribute static into rip. This should allow you to configure the classful networks to the neighbor who does not accept supernets.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...