10-03-2007 08:21 AM - edited 03-03-2019 07:00 PM
Hi,
We are implementing SSH onto a client site most devices are capable of ssh version 2 and are working but we have 2 old remote Access Routers (3620) running c3620-ik9o3s7-mz.123-22a.bin which only supports version 1.
Can anyone confirm how to get this working and how my SSH client on my PC should be configure to SSH1
10-03-2007 08:31 AM
Hi,
Yes, I think 3620 IOS's supports only SSH V1 not V2. You can check this with Feature Navigator tool.
Most ssh client auto-detect the version running in the target host. What is your SSH client vendor/version?
Regards,
Dandy
10-03-2007 08:40 AM
Putty.exe
release 0.58
I don't seem to be able to get SSH working on the 3620's
10-03-2007 08:42 AM
Robert
Have you generated the RSA keys on the 3620s?
What output do you get to the show ip ssh command on the 3620s?
HTH
Rick
10-03-2007 08:57 AM
Hi Rick
I've just fixed the problem it was an access list inbound on my ethernet interface that only allowed telnet all works a treat now
Cheers
10-03-2007 09:56 AM
Robert
Thank you for posting to the thread indicating that you have resolved the problem. It makes the forum more useful when people can read about a problem and can read the solution that resolved the problem.
HTH
Rick
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide