Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

ssh on IPSERVICES ver. 12.2(25)SEB4

does any one know how to enable ssh? I enable aaa new-model, I give the domain name, user name and password, but it does not have the crypto command to create the key nor does have the show ip ssh.

Am I missing something?

2 REPLIES
Bronze

Re: ssh on IPSERVICES ver. 12.2(25)SEB4

Here's a good starting point on cisco's website (this is on the 12.2 mainline code - you may want to research if there's a more appropriate IOS doc for your particular version, since I'm guessing its for a switch):

http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca7d5.html

In addition to what you've already done (domain name), you need to create your RSA keys (steps are covered in the document).

BTW. There is an excellent windows SSH client called "putty" - do a google search to find a good download site.

John

New Member

Re: ssh on IPSERVICES ver. 12.2(25)SEB4

Load crypto software into the switch. You can download it from CCO: ...-ipservicesk9-mz.122-25.SEB1.bin

Regards, Attila

132
Views
0
Helpful
2
Replies
CreatePlease to create content