Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Cisco Support Community site will be in read only mode on Dec14, 2017 from 12:01am PST to 11:30am for standard maintenance. Sorry for the inconvenience.

New Member

stacking

i would like to add an addition switch

3750G 48PS to a production stack which is having 3750 ( not 3750G). what do i need to be prepare?

thanks

5 REPLIES

Re: stacking

Hi

The good thing about stacking is that your operations wont affect.

Just make sure that while connecting the new switch to the existing stack using the stacking cable, you do not pull both the port's cable. Let one be there. This will continue the operation flow.

After you have introduced the new member, everything will be back to normal as it were.

Here are the following links which can help you

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_installation_guide_book09186a00807c64d9.html

Regards

JD

Cisco Employee

Re: stacking

Hello,

There are few things to be considered when you connect a new switch to a running stack. Please see the link below for managing switch stacks on 3750:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swstack.htm#wp1189523

HTH,Please rate if it does.

-amit singh

New Member

Re: stacking

does the new switch 3750G will take the master role of the 3750 Stack? because it has the higher speed port.

Re: stacking

Hi there,

No it shouldn't, take a look on this list:

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat3750/12235se/scg/swstack.htm#wp1152806

HTH,

Mohammed Mahmoud.

New Member

Re: stacking

thank you very much .... Mahmoud

122
Views
0
Helpful
5
Replies
CreatePlease to create content