Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Starting configuration on cisco 7604

Hello everyone,

First of all, to thank if you are reading this.

We are having a problem with a Cisco 7604 Core. A few days ago, we had a power outage in the Cisco 7604, and since that day we fail to turn on the router.

When the router starts loading the configuration generates a crashinfo just after enable Switch Fabric. Obviously after making the crash, all status lights are red RSP indicating a hardware failure.

We do not know if it is a failure of the chassis or the main module. Maybe someone of you know that this is the problem, would be very grateful.

Best regards!

Our router has the following components:

•          Chassis Cisco 7604

•          RSP720-3C-GE – RSP720 with integrated switch fabric/3C-GE

•          WS-X6704-10GE – 4 PORT 10 GIGABIT ETHERNET

•          WS-X674-SFP – 24 PORT GIGABIT ETHERNET - SFP

•          WS-X6748-GE-TX – 48 PORT 10/100/1000 RJ-45

******************************* This is an excerpt from the beginning of the Core ******************************

.................

*Jan 27 12:44:03.107: RP: Currently running ROMMON from S (Gold) region

*Jan 27 12:44:14.859: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for typ

e vlan

*Jan 27 12:44:43.643: %SYS-5-RESTART: System restarted --

Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-IPSERVICESK9-M),

Version 12.2(33)SRE1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Mon 29-Mar-10 22:38 by prod_rel_team

*Jan 27 12:44:33.887: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 t

o ensure console debugging output.

Firmware compiled 26-Jan-10 14:52 by integ Build [100]

*Jan 27 12:44:14.163: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for

type vlan

*Jan 27 12:44:14.371: SP: SP: Currently running ROMMON from S (Gold) region

*Jan 27 12:44:16.135: %C7600_PLATFORM-SP-4-CONFREG_BREAK_ENABLED: The default fa

ctory setting for config register is 0x2102.It is advisable to retain 1 in 0x210

2 as it prevents returning to ROMMON when break is issued.

*Jan 27 12:44:43.743: %SYS-SP-5-RESTART: System restarted --

Cisco IOS Software, c7600rsp72043_sp Software (c7600rsp72043_sp-IPSERVICESK9-M),

Version 12.2(33)SRE1, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2010 by Cisco Systems, Inc.

Compiled Mon 29-Mar-10 22:56 by prod_rel_team

*Jan 27 12:44:45.727: %OIR-SP-6-INSPS: Power supply inserted in slot 1

*Jan 27 12:44:45.727: %C7600_PWR-SP-4-PSOK: power supply 1 turned on.

*Jan 27 12:44:49.887: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for th

e fabric in slot 1.

*Jan 27 12:44:49.971: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Modul

e in slot 1 became active.

**************************** HERE IS WHERE IT FAILS AGAIN AND AGAIN *******************************************************

%Software-forced reload

12:44:53 UTC Thu Jan 27 2000: Unexpected exception to CPU: vector 1500, PC = 0x

AE94130 , LR = 0xAE940F4

-Traceback= 0xAE94130 0xAE940F4 0xAF27184 0xAE85F2C 0xAF41170 0xAF41170 0xAE85FE

8 0x98E6168

CPU Register Context:

MSR = 0x00029200  CR  = 0x20000022  CTR = 0x0B0A6B04  XER   = 0x00000000

R0  = 0x0AE940F4  R1  = 0x15019AC8  R2  = 0xFFFCFFFC  R3    = 0x14E393BC

R4  = 0x3C070582  R5  = 0xDC00003C  R6  = 0x3C070582  R7    = 0x00000001

R8  = 0x00029200  R9  = 0x00000000  R10 = 0x1471123C  R11   = 0xFFB40000

R12 = 0x00000C0D  R13 = 0x04044000  R14 = 0x0EFF1F40  R15   = 0x0EFF202C

R16 = 0x00000000  R17 = 0x00000000  R18 = 0x00000000  R19   = 0x00000000

R20 = 0x00000001  R21 = 0x0F015758  R22 = 0x0D470000  R23   = 0x0F0158B0

R24 = 0x0F015600  R25 = 0x0D470000  R26 = 0x0000FFFF  R27   = 0xFFB40000

R28 = 0x00000005  R29 = 0x0C2E8340  R30 = 0x00021200  R31   = 0x00000000

Writing crashinfo to bootdisk:crashinfo_20000127-124453-UTC

1075 Unused bytes of context save space

*** System received a Software forced crash ***

signal= 0x17, code= 0x1500, context= 0xe5b73c8

PC = 0xae94130, Vector = 0x1500, SP = 0x15019ac8

e

*Jan 27 12:44:54.659: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure consol

e debugging output.

*Jan 27 12:44:54.659: %OIR-SP-6-CONSOLE: Changing console ownership to switch pr

ocessor

*** System received a Software forced crash ***

signal= 0x17, code= 0x1500, context= 0xd247660

PC = 0x835948c, Vector = 0x1500, SP = 0x142dfef0

rommon 4 >

471
Views
0
Helpful
0
Replies
CreatePlease login to create content