static route administrative distance via radius

[aspakom]

I have a router with two adsl lines, one primary, one backup, terminated to the same LNS. I want to assign a static route for the same network to each of them with a higher administrative distance for the second and I want to do it via radius using cisco av-pair.

So far I haven't found any link showing that it can be done.

I have found this: Cisco-AVPair = ?ip:route=20.1.3.0 255.255.255.0 172.31.229.41"

but never anything like this:

Cisco-AVPair = ?ip:route=20.1.3.0 255.255.255.0 172.31.229.41 200"

Can you please tell me if it can be done or provide a link?

Thank you in advance.

[dsweeny]

You can use the command "Cisco-AVPair = ?ip:route=20.1.3.0 255.255.255.0 172.31.229.41 200" with RADIUS if you configure it for route download (aaa route download). Some other options to be made are Framed IP address and Net masks should be configured.

As a sample configuration

cisco-avpair = "ip:route=172.18.7.0 255.255.255.0 10.254.40.7 180"

Service-Type = Framed-User

Framed-Protocol = PPP

Framed-IP-Address = 10.254.40.7

Framed-IP-Netmask = 255.255.255.255

Framed-Routing = None

Framed-MTU = 1500

aaa route download