Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

static route administrative distance via radius

I have a router with two adsl lines, one primary, one backup, terminated to the same LNS. I want to assign a static route for the same network to each of them with a higher administrative distance for the second and I want to do it via radius using cisco av-pair.

So far I haven't found any link showing that it can be done.

I have found this: Cisco-AVPair = ?ip:route="

but never anything like this:

Cisco-AVPair = ?ip:route= 200"

Can you please tell me if it can be done or provide a link?

Thank you in advance.

New Member

Re: static route administrative distance via radius

You can use the command "Cisco-AVPair = ?ip:route= 200" with RADIUS if you configure it for route download (aaa route download). Some other options to be made are Framed IP address and Net masks should be configured.

As a sample configuration

cisco-avpair = "ip:route= 180"

Service-Type = Framed-User

Framed-Protocol = PPP

Framed-IP-Address =

Framed-IP-Netmask =

Framed-Routing = None

Framed-MTU = 1500

aaa route download