Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Static Route to Null0 interface is not appearing in ip routing table by default on 2921

Static Route to Null0 interface is not appearing in ip routing table by default on 2921 

I have tried same config on 1721 and  892 and it shows there.

on 892

R13#sh run | s ip route
ip route 0.0.0.0 0.0.0.0 30.0.0.254
ip route 192.168.0.0 255.255.0.0 Null0  ------

on 892 routing table

S 192.168.0.0/16 is directly connected, Null0

The S route is missing on same config on 2921 ios version 154-3.M1

Do you have advise how to enable static routes to null0 interface to appear in ip routing table?


Regards,

Robert

Everyone's tags (3)
1 REPLY
New Member

The solution for that problem

The solution for that problem was upgrading the IOS version to Version 15.4(3)M4

100
Views
0
Helpful
1
Replies