Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Static Route

Hi ALL:

I have 2 links primary is MPLS if MPLS goes down IPSEC is established using other link

Whats happenning is 1 of the static route enrty is showing when the IPSEC is down and when i am trying to remove it it giving error.

I am using 7206xm.

MPLSR1#sh ip route static | i 10.20.28.0

S 10.20.28.0/24 [1/0] via 10.252.19.23

MPLSR1#sh crypto isakmp sa | i 10.252.19.23

MPLSR1#sh ip route 10.20.28.1

Routing entry for 10.20.28.0/24

Known via "static", distance 1, metric 0

Redistributing via eigrp 100

Advertised by eigrp 100 metric 10000 100 255 1 1500

Routing Descriptor Blocks:

* 10.252.19.23

Route metric is 0, traffic share count is 1

HBBCPMPLSR1#sh ip route static | i 10.20.28.0

S 10.20.28.0/24 [1/0] via 10.252.19.23

HBBCPMPLSR1(config)#no ip route 10.20.28.0 255.255.255.0 10.252.19.23

%No matching route to delete

Chao

Vishwa

2 REPLIES
New Member

Re: Static Route

on HBB type "show run | i ip route"

and see what exact command have you added and then do no to that.. or try to reload

New Member

Re: Static Route

Hi ,

Sorry my bad its all the output are from MPLSR1 ,please ignore HBB at front.

Chao

Vishwa

240
Views
0
Helpful
2
Replies
CreatePlease login to create content