any traffic that comes in over the Eth 0/2 port I need to be routed back out over that port. this port is used for VPN traffic only. how do we specify that the traffic coming in over this port is routed back out over this port...
I generally avoid PBR as I consider it a break fix option and not a scalable solution.
That said if you know the VPN addresses you want to route from the 3560 to the Adtran @ 192.168.10.1 you could create a policy that would facilitate it. Armed with that information you could simply use static routes to force the selected networks to the Adtran vs. the ASA. Both of these options are less than desirable for a ‘predicable supportable network’
Routing everything though the ASA will result in a more supportable topology. If you have a syslog server and point the ASA at it; you will also gather valuable data about the traffic traversing these devices.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...