Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

still with the compatibility

I know it's for the 1700 series but would the 1ENET WIC work in my 2620? I really need something with an rj54 connection that can be configured to work between my cable modem and my network.

2 REPLIES

Re: still with the compatibility

Hi John

As per the CCO document Cisco 2600 supports NM-1E module by default.

http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html

Also Cisco 2620 platform comes up with 1 network module slot platform it can accomodate NM-1E module..

http://www.cisco.com/en/US/products/hw/routers/ps259/ps265/index.html

regds

Silver

Re: still with the compatibility

the WIC-1ENET is not supported on the 2600 router>Refer here for the compatability matrix -

http://www.cisco.com/en/US/products/hw/routers/ps214/products_tech_note09186a00800ae37f.shtml

You 2620 has 2 ethernet ports, so you could use on to connect to the cable modem and the other would be your inside network.

91
Views
5
Helpful
2
Replies
CreatePlease to create content