Hello,
I have an STM-1 link set up b/w 2 remote ends. The links are terminated on routers with NM-1A-OC3-POM. After setting up the link end to end, we discovered that the interface was down and line protocol was down. Looking at the cards physically, The RxCR light was green, RxCl was blank, TxCl was green, RxAlm was amber.
The configuration on Router A
int atm1/0
ip address 10.99.4.70 255.255.255.252
no atm ilmi-keepalive
pvc 1/33
protocol ip 10.99.4.69 broadcast
Router B
int atm1/0
ip address 10.99.4.69 255.255.255.252
no atm ilmi-keepalive
pvc 1/33
protocol ip 10.99.4.70 broadcast
The SFP on the Router is Multimode but we used Singlemode fibres for connections b/w the Router and the ADM
Please what could the problem be?