Please look at the attached picture. Switch 2 upper port is Gb1/1, which is blocked and the lower one is the Gb1/2, which is the root port. I dont't understand why not the upper port become to the root port... Because both of the mentioned port path cost is the same (16), and as I know in this situation the port with the lowest mac address win the election, which is the upper one (the upper port Gb1/1: 0060:4779:E401 while the Gb1/2: 0060:4779:E402)
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...