The issue has been experienced by our customer when testing and validating this architecture. When he performs a shut/no shut on Juniper side he notices after some occurences of shut/no shut (sometimes after 3 tries, sometimes after a little more tries) both link status stay down/down (another shut/no_shut on either site do not fix it).
This issue is reproducible each time we repeat a shut/no shut after a certain number of times.
The only solution to bring back the link up is to manually unplug and plug the fiber.
The thing is we see this behaviour only with this hardware combination (WS-C3750G-24PS-S --> AND NOT <---other models of 3750)....
IOS verison is ipbasek9-mz.122-44.SE3
Any suggestion or similar experience maybe with other material would be welcomed.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...