I have this situation where a customer has this addressing.
The customer has subnetted 192.168.1.0 network as follows.
192.168.1.48/28 and 192.168.1.64/28.
the problem is,now they want to match the IP range of 192.168.1.80 to 192.168.1.254 in an access-list. So my problem is, what subnet mask will match the remaining range of 192.168.1.80 to 192.168.1.254 after the initial /28 subnetting ?
This document gives several answers on frequently asked questions for PFRv3 channel state behavior.
Q1: What are all the channel operational states from a BR (border role) perspective and what are the rules/conditions to be in each st...
The need was to reach an host inside a LAN through a VPN connection managed by the LAN gateway (Cisco 1921).
The LAN gateway performs NAT and there was a dedicate nat rule for the host i wanted to reach through VPN.
I couldn't connect to the hos...
We have 3 identical switches configured by someone else and would like to claim some of the Gigabit ports(G1/G2/G3/G4) for use on servers. When we try to change the wiring and configuration, we run in to connectivity issues. Attached is a des...