Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 
Community Member

suggest model

Kindly Suggest model for below mentioned product.

Technical Specification 24 Port Switches

Physical Interfaces

? 24 ports Fast Ethernet RJ45 Full Duplex with optional PoE support and optional K.21

Protection with Two SX GBIC Multi Mode Module fitted.

? 2 SFP Gigabit Ethernet Optical ports

? 2 ports 10/100/1000 Ethernet RJ45 Full Duplex

Power Supply

? Fixed PSU

? -48V DC / Universal AC Input (110-230V,



1U 19? Rack Mountable


? IEEE802.1q, 4096 VLANs supported

? GARP, GVRP support

? IEEE802.1v Port/Protocol Based VLAN


Quality of Service

? QoS at VLAN level

? IEEE802.1p Class of Service

Power Over Ethernet (PoE) (Optional)

? -48V DC up to 15.6W on each port

? In DC Power Supply model only


? Port Isolation (Protected Port Support)

? IEEE 802.1x Port based Authentication

? RADIUS Client Support

? DHCP Relay and DHCP Option 82


? Telnet, SSHv2

? Industry Standard CLI (with multiple user access)

? Port mirroring for debugging & monitoring


Technical specification Distribution Switches

�� 1 Rack unit with 12 SFP ports and throughput up to 1Gbps fitted with one LX/LH Transceiver Single Mode Module and six SX Transceiver Multi Mode Modules.

�� QOS, IP Base Service Image IOS, Routing at access Layer.

�� Adaptive Real-Time RF management.

�� Layer 2 and layer 3 securities with multiple Extensible Authentication Protocol.

�� VLan and Support up to configuration of 1005 VLans.

�� Policy Control with Admission Control.

�� Managed through Command Line Interface as well as Graphical User Interface.

�� Spanning-Tree Configuration with Redundancy for Fault Backup.

�� TACACS + and Radius Authentication.

�� Port Security, Bandwidth Management, IGMP Filtering.

�� 802.1Q Tagging, VTP for Dynamic Trunk Configuration.

�� Remote Switch Port Analyzer (RSPAN)

�� Compatible with SNMS Software?s.

�� Configurable up to 12,000 MAC addresses.

�� Configurable up to 20,000 unicast routes.

�� Power supply supports input voltages between 100 and 240VAC.

�� Per-port status LEDs: link integrity, disabled, activity, speed, and full-duplex indications.

�� System-status LEDs: system, RPS, and bandwidth-utilization indications.

�� TFTPv2 for software updates

�� SNMP v1/v2/v3

�� Telnet, SSHv2

�� Industry Standard CLI (with multiple user access)

�� Port mirroring for debugging & monitoring

�� Dual Application Image support

�� Dual Configuration support

�� Trusted Manager List

Community Member

Re: suggest model

hi ajay can tell me is this any setup u going through

CreatePlease to create content