Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Customer has WS-X4013+ supervisor engine and want to use as redundant SUP for WS-C4507R-E. Is it possible to configure EIGRP then? Please confirm if possible.

Note that customer already has WS-C4507R with SUP WS-X4013+ and has configured EIGRP.

Regards,

Sumaiya

3 ACCEPTED SOLUTIONS

Accepted Solutions

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Hello Sumaiya,

Based on the document, the SUP-II engine will not be having the feature set of EIGRP starting 12.2(25)SG. I notice you are running 12.2(52)SG. Below is the link

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5347/product_data_sheet09186a0080197424_ps4324_Products_Data_Sheet.html

Another switch you have has 12.2(20)EWA3 which has a feature set of EIGRP, but it not supported by Cisco anymore, AFAIK.

You may get the feature set if you downgrade your IOS 12.2(52)SG to something lesser than 12.2(25)SG, but unfortunately is not supported by Cisco (i.e you won't get any TAC help !)

Hope this helps,

Vivek.

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Yes, incase of hardware failure, you would get a support based on the entitlement you have with cisco.

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Hope your query has been answered. Please close the thread.

5 REPLIES

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Hello Sumaiya,

Based on the document, the SUP-II engine will not be having the feature set of EIGRP starting 12.2(25)SG. I notice you are running 12.2(52)SG. Below is the link

http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps5347/product_data_sheet09186a0080197424_ps4324_Products_Data_Sheet.html

Another switch you have has 12.2(20)EWA3 which has a feature set of EIGRP, but it not supported by Cisco anymore, AFAIK.

You may get the feature set if you downgrade your IOS 12.2(52)SG to something lesser than 12.2(25)SG, but unfortunately is not supported by Cisco (i.e you won't get any TAC help !)

Hope this helps,

Vivek.

New Member

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Hi Vivek,

Thanks a lot for your support.

One thing I want to be confirmed -

If i copy the 12.2(20) IOS from my existing switch to that SUP [the sup having 12.2(52)], then it will support full eigrp. but i will not get Tech support for IOS but for other issues - i will get. Am i right?

Sumaiya

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Yes, incase of hardware failure, you would get a support based on the entitlement you have with cisco.

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Hope your query has been answered. Please close the thread.

New Member

SUP WS-X4013+ with WS-C4507R-E (Does support EIGRP?)

Yes Vivek. Thanks a lot.

458
Views
0
Helpful
5
Replies