I need some help regarding SUP32 with two images below.
On both of them, we applied boot variable syntax such as follows:
boot system flash sup-bootdisk:s3223-ipservicesk9_wan-mz.122-18.SXF4.bin
boot system flash sup-bootdisk:s3223-ipbasek9-mz.122-18.SXF7.bin
For all our switches with SUP32 using s3223-ipservicesk9_wan-mz.122-18.SXF4.bin image will show that it has been booted from bootdisk: when I do sh ver on the switch and showing such as the following:
System image file is "bootdisk:s3223-ipservicesk9_wan-mz.122-18.SXF4.bin" ,
while SUP32 using s3223-ipbasek9-mz.122-18.SXF7.bin image shows as it's been booted from sup-bootdisk:
and showing such as
System image file is "sup-bootdisk:s3223-ipbasek9-mz.122-18.SXF7.bin".
Both SUP32 have config-register value as 0x2102 and image is saved in sup-bootdisk:
My question is when applying 122-18.SXF4.bin file with the boot variable we have used above, why would it show that it has booted from bootdisk: instead of showing such as sup-bootdisk:. SUP32 w/ 122-18.SXF7.bin file shows that it has been booted from sup-bootdisk:. Is it because of ios image version difference between SXF4 and SXF7? I thought even with SXF4 should still show that it has been booted from sup-bootdisk: when we do sh ver on the device. However, it's not showing as it's been booted from sup-bootdisk:. Any of you aware of this issue or did I make any false statements? Please get back to me as early as possible so that we may know for sure what to do with those issues.
Router1 uptime is 4 weeks, 1 hour, 42 minutes
Time since Router1 switched to active is 4 weeks, 1 hour, 41 minutes
System returned to ROM by power-on (SP by power-on)
System restarted at 23:31:45 EDT Fri Jun 27 2008
System image file is "bootdisk:s3223-ipservicesk9_wan-mz.122-18.SXF4.bin"
Router2 uptime is 6 weeks, 14 hours, 3 minutes
Time since Router2 switched to active is 6 weeks, 14 hours, 3 minutes
System returned to ROM by power cycle (SP by power on)
System restarted at 11:09:28 EDT Fri Jun 13 2008
System image file is "sup-bootdisk:s3223-ipbasek9-mz.122-18.SXF7.bin"
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...