Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SUP720 to RSP720 upgrade

I am planning to upgrade from SUP720 to RSP720. I was looking for a step-by-step upgrade procedure document on CCO, no luck yet!

Just wondering if there is any relevant document available for this!

thanks,

Fawad

1 REPLY
Cisco Employee

Re: SUP720 to RSP720 upgrade

Hi,

The following link will help you to see if RSP-720 supports your current hw:

http://www.cisco.com/en/US/docs/routers/7600/Hardware/12.2SR_supported_hw/7600_hwd.html#wp1031424

12.2(33)SRB minimum is required.

As a migration procedure assuming all the hw is supported, you should upload the target IOS in the flash in addition to the target configuration (including a no shut for the interface if you want).

Once it loaded, just copy the configuration from the flash to the running-config and do all the post-migration checking.

HTH

Laurent.

799
Views
5
Helpful
1
Replies
CreatePlease login to create content