Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

support for PA-MC-2T3+

HI

I have a 7204 VXR router running 12.2(3) and want to install the PA-MC-2T3+ linecard.

After checking the following

CISCO 7000 FAMILY PORT ADAPTER PLATFORM AND IOS RELEASE SUPPORT MATRIX

http://www.cisco.com/en/US/products/hw/modules/ps2033/prod_brochure0900aecd804b1a64.html

IOS 12.2

PA-MC-2T3+ 7200**

What does the ** next to 7200 indicate ?

I will also be running 3 ? PA-MC-8TE1+ linecards, anything to watch out for?

Thanks

Frank

1 ACCEPTED SOLUTION

Accepted Solutions
Silver

Re: support for PA-MC-2T3+

Based on the ANSI T1.231 specification a T3 controller should not react to an alarm (LOF, LOS, AIS) unless the alarm persists for 2 +/-0.5 seconds.IOS which has the fix for 7204 models are 12.1(23.01)E 12.0(29.01)S 12.3(09.07)T 12.2(24.08)S 12.2(24a) 012.003(009.007) 012.002(024.008) 12.2(19c).Upgrade to this IOS to fix this problem.That is the reason ** is seen.Refer the URL

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_field_notice09186a00802ff01d.shtml

1 REPLY
Silver

Re: support for PA-MC-2T3+

Based on the ANSI T1.231 specification a T3 controller should not react to an alarm (LOF, LOS, AIS) unless the alarm persists for 2 +/-0.5 seconds.IOS which has the fix for 7204 models are 12.1(23.01)E 12.0(29.01)S 12.3(09.07)T 12.2(24.08)S 12.2(24a) 012.003(009.007) 012.002(024.008) 12.2(19c).Upgrade to this IOS to fix this problem.That is the reason ** is seen.Refer the URL

http://www.cisco.com/en/US/products/hw/modules/ps2033/products_field_notice09186a00802ff01d.shtml

119
Views
0
Helpful
1
Replies