11-30-2009 05:56 AM - edited 03-04-2019 06:49 AM
Hi,
Configuration register value for 3560 swicth. It shows 0Xf is there anything wrong with this value?
What is the significance of this value like in router config-reg value which we use to recover the password ?
Please share the experience.
Any link on cisco.com is highly appreciable.
Thanks in advance
Subodh
Solved! Go to Solution.
11-30-2009 06:07 AM
bapatsubodh wrote:
Hi,
Configuration register value for 3560 swicth. It shows 0Xf is there anything wrong with this value?
What is the significance of this value like in router config-reg value which we use to recover the password ?
Please share the experience.
Any link on cisco.com is highly appreciable.
Thanks in advance
Subodh
Subodh
0xf is the normal config register value for the 3560 switch. When you do a password recovery on the 3560 + others (see attached link), you do not reset the config register, instead you use the mode button on the front of the switch to go into ROMMON -
Jon
11-30-2009 06:07 AM
bapatsubodh wrote:
Hi,
Configuration register value for 3560 swicth. It shows 0Xf is there anything wrong with this value?
What is the significance of this value like in router config-reg value which we use to recover the password ?
Please share the experience.
Any link on cisco.com is highly appreciable.
Thanks in advance
Subodh
Subodh
0xf is the normal config register value for the 3560 switch. When you do a password recovery on the 3560 + others (see attached link), you do not reset the config register, instead you use the mode button on the front of the switch to go into ROMMON -
Jon
11-30-2009 06:55 AM
Hi,
Jon thanks for your information. It clears my confusion.
Thanks
subodh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: