Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Switch 3560 config-register value

Hi,

Configuration register value for 3560 swicth. It  shows 0Xf  is there anything wrong with this value?

What is the significance of this value like in router config-reg value which we use to recover the password ?

Please share the experience.

Any link on cisco.com is highly appreciable.

Thanks in advance

Subodh

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Blue

Re: Switch 3560 config-register value

bapatsubodh wrote:

Hi,

Configuration register value for 3560 swicth. It  shows 0Xf  is there anything wrong with this value?

What is the significance of this value like in router config-reg value which we use to recover the password ?

Please share the experience.

Any link on cisco.com is highly appreciable.

Thanks in advance

Subodh

Subodh

0xf is the normal config register value for the 3560 switch. When you do a password recovery on the 3560 + others (see attached link), you do not reset the config register, instead you use the mode button on the front of the switch to go into ROMMON -

http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

Jon

2 REPLIES
Hall of Fame Super Blue

Re: Switch 3560 config-register value

bapatsubodh wrote:

Hi,

Configuration register value for 3560 swicth. It  shows 0Xf  is there anything wrong with this value?

What is the significance of this value like in router config-reg value which we use to recover the password ?

Please share the experience.

Any link on cisco.com is highly appreciable.

Thanks in advance

Subodh

Subodh

0xf is the normal config register value for the 3560 switch. When you do a password recovery on the 3560 + others (see attached link), you do not reset the config register, instead you use the mode button on the front of the switch to go into ROMMON -

http://www.cisco.com/en/US/products/hw/switches/ps628/products_password_recovery09186a0080094184.shtml

Jon

New Member

Re: Switch 3560 config-register value

Hi,

Jon thanks for your information.  It clears my confusion.

Thanks

subodh

14366
Views
0
Helpful
2
Replies