07-07-2014 08:52 PM - edited 03-04-2019 11:18 PM
Hi All,
I'm going to buy a Cisco 4500X switch to perform Layer 3 functions. Can some one help me to get a idea about 4500X layer3 performance ???
Thanks ..........
07-08-2014 05:25 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
From Cisco's data sheet:
Scalability | |
System Throughput | Up to 800 Gbps |
IPv4 Routing in Hardware | Up to 250 Mpps |
IPv6 Routing in Hardware | Up to 125 Mpps |
L2 Bridging in Hardware | Up to 250 Mpps |
07-08-2014 05:28 AM
07-08-2014 09:03 AM
Hello, mmendis. Let me check for more reference that can help you with your inquiry. Are you already working with any Cisco partner/vendor for this concern? Feel free to send me an e-mail (adawa@cisco.com), for additional concerns. Kind regards.
07-15-2014 09:47 PM
Dear adawa,
Hope you received my mail sent your Cisco mail address. Still I want to know the layer 3 performance of 4500X :(
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide