Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

Switch Config Help

Hai,

I have a topology like this.Two L2 Switch has the VLAN X and Y,...Rquiremet is VLAN X and Y shud be able to access the internet.

VLAN X shud Have access to all servers ...

VLAN Y Must have access to only two servers (SQL and FTP).... (Ve to restrict traffic to HTTP Server)

What should be the configuration in all devices to achive this ...

Kindly help ...

Thanks in Advance

Lijesh.N.C

1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Super Bronze

Re: Switch Config Help

Which Vlan do the servers reside?

Just place an incoming ACL on that Vlan for traffic sourcing Vlan Y with permitting access to SQL and FTP server.

interface vlan [server vlan]

ip access-group servers in

ip access-list extended servers

permit ip [vlan y] [sql server]

permit ip [vlan y] [ftp server]

(implicit denied all)

HTH,

__

Edison.

2 REPLIES
Hall of Fame Super Bronze

Re: Switch Config Help

Which Vlan do the servers reside?

Just place an incoming ACL on that Vlan for traffic sourcing Vlan Y with permitting access to SQL and FTP server.

interface vlan [server vlan]

ip access-group servers in

ip access-list extended servers

permit ip [vlan y] [sql server]

permit ip [vlan y] [ftp server]

(implicit denied all)

HTH,

__

Edison.

Community Member

Re: Switch Config Help

Hai ,

Thanks a lot there was a little confusion is config ....now its clear

Lijesh

107
Views
0
Helpful
2
Replies
CreatePlease to create content