We are facing inconsistent latency in the switched network. One probable reason could be recalculation of STP due to some unknown reason.
Another reason, there could be problem with the servers those are under consideration.
So we need to generate a traffic from the same VLAN as those of servers and then send that traffic to users vlan. Do we have any free-ware tool available that will generate traffic from that host machine as source and one target IP. We can generate this traffic and measure the speed with which we are able to transfer the data from server VLAN to user VLAN with this we can be sure if there is any performance issue with switched network.
Please share the experience or suggest to isolate the problem.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...