Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

switch redundancy and router redundancy and Vlan

Dear All,

i would like redundancy switch and router and vlan.

Coudl you advice configuration or documents?

Best Regards,

3 REPLIES

Re: switch redundancy and router redundancy and Vlan

See the attached. Just a suggestion.

New Member

Re: switch redundancy and router redundancy and Vlan

Dear Andrew,

Thank you for your advice,, :)

so on your diagram that you gave me it don't have router link to branch.I would like link branch to HQ by lease line then i have to at one more router on HQ, could you check for me again my diagram that i was post last time.

Oh could you give me configuration for etherchannel ? and more configuration on my diagram?

Thanks for you help :)

Best Regards,

Join

Re: switch redundancy and router redundancy and Vlan

OK - from the diagram that was not clear.

Are you running any dynamic routing protocol, or do you just have static routes?

The etherchannel config would look something like:-

Switch 1 config:-

interface Port-channelxx

description *** EtherChannel switch 2 ***

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

!

interface Gig0/1

description *** Switch 2 etherchannel ***

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 50 mode desirable

!

!

interface Gig0/2

description *** Switch 2 etherchannel ***

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 50 mode desirable

!

Switch 2 config:-

interface Port-channelxx

description *** EtherChannel switch 1 ***

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

!

interface Gig0/1

description *** Switch 1 etherchannel ***

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 50 mode desirable

!

!

interface Gig0/2

description *** Switch 1 etherchannel ***

switchport

switchport trunk encapsulation dot1q

switchport mode trunk

no ip address

channel-group 50 mode desirable

!

HTH>

1117
Views
0
Helpful
3
Replies
CreatePlease to create content